Another tire question

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Feb 3, 2006
Threads
74
Messages
313
Location
Weatherford, OK
I know you guys are probably getting sick of me asking tire questions but i need some help. I have a chance to buy some slightly used swampers in 36 x 14.50 15. I've got hfs 4 inch with ccot 2 1/2 shackles. Is there any chance they'll work and if so how much trimming will i need? I hate to pass them up.
 
Buy the 36's and send them directly to me. Then go get yourself some 35's:D Sounds like an excellent idea:idea: I don't know about the fitment though, sorry.
 
The diameter could be mitigated by lowering the bump stops, but I bet the 14.50" width will prove the greater difficulty for rubbing the rear inner fenderwell and hitting the front frame or catching the lower rear of the front fenders.

Do you still have stock steering with the drag link along the outer left frame rail?
 
I have 14.50 now- too wide for my taste but couldnt pass up the deal at the time. Adjust out steering stops, should be okay in the front. Will have to trim sheet metal in the rear and they will shine up your fender wells good. I have 1/4 inch spacers and ? not sure 3-3.5 in BS. Used these on SUA this way.

Eric
 
4x4Poet said:
Do you still have stock steering with the drag link along the outer left frame rail?

Steering is completely stock.

I'm currently running 15x10 wheels with no spacers, not sure of the backspacing though.
 
Back
Top Bottom