another SOA question

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Aug 14, 2004
Threads
53
Messages
107
gentlemen,

I'm in the stage of doing a SOA conversion on my 40. I need your advise on how to do it correctly 'coz i wanna do it my self. I'll be using the stock leaf springs up front and rear. Tire size is 33"x12.5R15. What is the recommended backspacing? When we say 3" of lift, where is the reference point for my measurements? Will it need a cut and turn? Pics please of your conversions.

Cheers!

gado
 
33's and a SO looks bad...


35's are a minimum IMHO. I ran 38's with my springover.
SOA is more like 5-8" of lift depending on springs.


3.5" backspacing. on the rims (some rims work with 3.75 BS but check before you purchase)


BTW, Gado, how good are you at fab work?
 
Great thread to start, but before you dive into this big of a mod do lots of homework. You'll get tons more info by researching it than will come about in this thread alone. Just an idea.

Search here and at Pirate4x4.com for SOA conversions and you can read for days, tons of good info out there.

I'd agree that SOA for little 33s is a waste and will look misproportioned. With stock springs and no SR or anything you can easily clear 35s with no trimming whatsoever. Looks pretty good too. The amount of lift can be measured anywhere on the frame or body, just picture that with your stock springs, and no shackle reversal, that your bumper, along with everything else, will be about 5-6 inches higher than it is right now. :eek: Pretty cool. :D

We could give a list of things to consider, but it's been typed a hundred times and you can find it in about 100 different threads.

Post pics of your progress in this thread. And have fun. :cheers:
 
Back
Top Bottom