Another NEW Project

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Dec 20, 2004
Threads
59
Messages
266
Location
Charlotte NC
I got another fj delivered today, showed up without a roof. The guy said it must have blown off :mad: so i have to file insurence claims and such. I got it cheap but the body is really rusty...the frame is in ok shape with not much rust. Its got the 3 on the tree. The engine runs, but sounds weak. I guess I should start by rebuilding the carb, change the hoses, wires ect. The wiring is a mess, but it should be a good project. Somebody actually riveted zinc sheet metal on the outside and put a huge coat of bondo on it...so far I'm still chipping all that off. Since my other fj has a 350 in it....im not sure if I have the 2f or not. I dont think so because its a 68...but im not sure. Anybody got any ideas on where I should start?
uyyu5fo.jpg

imgp10376yz.jpg

uyyuuuyyyuuu8lu.jpg
 
Should definitely be an F, although I am not familiar enough with the 2F to specifically tell the difference.

Question: Where is your 4wd vacuum system and linkage - should be on your firewall, but I don't see it. Maybe the 68's were a little different than my 71.

Looks like a hell of a mess, but also looks like a lot of fun!
 
metalonmetal said:
if you got the room... rip it aaaalll apart... then start with the frame, and put it back together piece by piece...

I went to look at your website, is it different in canada, doing engineering without a license for things you aren't producing yourself is illegal. do they have different rules? i do the same type of stuff, but I don't advertise it.
 
FoYoChe said:
I went to look at your website, is it different in canada, doing engineering without a license for things you aren't producing yourself is illegal. do they have different rules? i do the same type of stuff, but I don't advertise it.

i don't engineer. i do the drafting. pm me if you have any more questions.
 
pretty sure its an F motor prolly the original. Get the # off the block to find out
 
I would 'assume' it's an F engine given the year. I don't know much else about F engines, but you may want to see if it has a serial # or something 'Poser' can cross reference with his 2F chart he is working on. Also, from the same thread, 'mel lowe' used these:

I used this chart to determine my motor is a 75 2f.


http://www.sor.com/2fengine.html

Mine was built prob in Nov or Dec



http://www.sor.com/fengine.html


Good luck and have fun with it all. That's why we're in it right?....
 
Hell yea! I got a 2f. The guy I bought it from didnt mention the engine had been replaced. 2f-000743 is the serial number I found...so I guess its a 1975 block. :D
Where can I get some engine parts for these things online?

imgp10653ml.jpg
 
Engine parts...

What are you looking for? Toyota dealers can get a surpising amount of parts still. Else it's off to Specter, CCOT and the list goes on. From what I have observed on this forum, usually some knows somebody who has a friend who's uncle has the part, or 'CruiserDan' has the part.
 
Yeah. I feel your pain with that one. I getting ready to tear into my tub as well. If you look at my truck from the front, it looks like a perfect truck. Once you see past the fenders, it looks like a lot of work. An it is...
 
After hundreds of hours of welding cutting and sanding...I finally got some primer sprayed today. I will leave it like this for a few weeks before I apply the silver topcoat. It feels good to have most of the body work out of the way!
imgp1324vp3.jpg

imgp1331py9.jpg

imgp1332ah8.jpg
 
More pic's please, great job, we see lots of tear down projects on MUD but not many with this kind of turn around cheers!
 
Back
Top Bottom