Another keyless entry thread

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jun 20, 2007
Threads
115
Messages
593
Location
Provo, Utah
I just bought an Audiovox AA-925 keyless entry for my '92 FJ80. I had no problem finding a 12V constant and a switched 12V and a ground to tap into. My problem is with the door lock and unlock outputs. I have heard that a relay and diode is needed to make the keyless entry work right, but I have also read of people who didn't need them. I downloaded the EWD for my cruiser and the colors don't quite match up with what people are saying on here. Here is the info. they included with the instructions (very poor instructions). Red wire = lock if polarity is negative and unlock if polarity is positive. Green wire = lock if polarity is positive and unlock if polarity is negative. Can anyone help steer me in the correct direction with this install? Thank you.
 
I need to get a digital camera, then I could show you the setup that is on my 80. I don't know who put it on, or when, because I never got a keyless entry fob when I bought it. But I've got wires coming from my control module then to a relay.
 
Back
Top Bottom