another CDL issue

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Feb 12, 2016
Threads
1
Messages
1
Location
melbourne
Hey everyone

I am having a CDL issue in my FZJ80
My transfer is currently stuck in 4x4.
when I press the CDL button into the lock position i hear a click
when i press it out of the lock position i hear another click.
The CDL light and ABS lights are on.
it is definitely in 4x4 as i am still able to drive the vehicle even with the front shaft removed.
I pulled down the actuator and it is nice and clean no water ingress no muck or dirt and the actuator moves freely so it isnt jammed there are no signs that it is burned out, resistance is within spec across pin 2 and 3
there is no continuity between pin 2 or pin 3 and ground

I have heard that i can further test the actuator with a 9v battery and wondered if someone has instructions on how to do this.

Cheers Matt
 
Back
Top Bottom