Another Birfield Question

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Apr 7, 2005
Threads
53
Messages
1,354
Location
Afton VA
I have another Birfield question. I did some searching but could not find a definite answer.

I have a 78 FJ40 with front disks and Birfields with 27 spline outers.

I have a couple of spare Birfs from a pre 76 cruiser with the course outers. I would like to use these as trail spares.

Will the axels from the pre 76 cruiser work in my 78 as long as I also swap in the correct hub?

Thanks!
 
OK, I just read some more info on the tech trivia page. I see that the 76-79 fine spline birfs are a little longer and have a smaller bell than the pre 76 birfs.

So just to get my facts straight, are the axel housings the same but with different size steering knuckles?
 
Drum spindles are different...


I am not positive that the bushing in the spindles is a different size tho..

From what I understand there are people that have put disk brake birfs in drum brake frontends.

steve?
 
You can use a drum brake front axle housing and convert it over to disc brakes using Land Cruier or minitruck knuckle parts....pretty common swap....only hitch is that you may need to use a grinder and open up the end of the axle housing to get the larger disc birf in there....again, no biggie...been done by many folks over the years.


The bushings are a smaller on the drum birf spindle....along with the spindle being smaller and the wheel bearings.


:beer:


Call me back Jason! You at work? ;)
 
Back
Top Bottom