Another Alternator Issue

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Oct 14, 2007
Threads
11
Messages
35
I would like to thank you all for the help I got from this forum. This forum make my life easier and my LC experience enjoyable.

1. I have a 1992 LC. Does anyone know how to identify if my alternator 80 AMP or 90 AMP.

2. I have a new battery, because the old one keep losing charge after only less than one year. Now the new battery is almost empty again. I have cleaned battery contacts, replaced fusible links. The likely failure is alternator. Am I right?

Thanks
 
You have an 80 amp alternator.. But to save you some headache dont buy advanced,pepboys reman alternators I went through 4 of them in less the a couple years.
 
Ditto; avoid the aftermarket altenators, just a PITA and not worth the hassles. AutoZone and the others are useful if you want to have your alternator checked out; best to go back to the place that sold you the current one, if you know.
Bite the bullet and buy an OEM Toyota alternator from CDan. It will last 10 times longer than any of the aftermarket crap.
 
1. I have a 1992 LC. Does anyone know how to identify if my alternator 80 AMP or 90 AMP.Thanks

80A alternators have an external fan, while 90A alternators have an internal fan.

This was a 3FE option only, IIRC.
 
Last edited:
Just replaced mine last night in a desperate situation. I NEED the truck. I stopped at an auto store to check the battery. Died in the parking lot. Went in tested battery, 5 volts remaining in a red top optima. I hope I didn't kill it. I'm going t recharge it to see.

I bought a yellow top, and went to another auto store looking for alternator. This has the external fan, but says it's a 90 AMP. Thought about it, decided to just get it done. Drove home, and started orking at 9:30pm. I finished with the test drive at 2:30 AM. PITA, especially with that stinkin' air pump in the way (I took it out). I had also worked all day in surgery, then worked on my house for a few hours before the Cruiser decided she wanted an alt. So my brain was functioning at a slow pace. I did tighten all belts, and found that every bolt on the oil pan was loose. Some really loose. oil pressure is up, and seems to have stoped leaking oil. I hope that was all she needed to fix that leak. That would be awesome. Amazing how many bolts are a 12mm on that thing. I think you could just abut rebuild the Cruiser with a 14mm, and a 12mm wrench.

The day before switched to Mobile one high milleage synthetic, changed the tranny fluid and the diffs.

AND...

Well, the alt is in. Nice not seeing all those lights glowing, and the lights are much brighter at night. Back to the daily abuse for her.

This truck never ceases to amaze me. Best vehicle I've ever owned, and I've owned many!
 
Last edited:
Back
Top Bottom