Alternator wiring

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Mar 18, 2018
Threads
1
Messages
2
Location
Australia
Hi all,

I’ve been to a couple auto lecs and they can’t give me a straight answer (for some reason)

I installed a new harness into my Fj45 that had a 302w and an internal reg alternator. Just swapped it out with a 12ht and have bought another internal reg alternator.

Current wiring is a two wire in the chrome alternator pic..
battery pos - which runs direct to battery pos on solenoid
and
warning light wire which runs into fire wall (no fuseable link)

New alt has a 3 blade plug as shown in pic.

What I take is..

S=B+
IG= Warning light

Do I need to run a third wire (L)
If so where from and should I have the links
945977F8-2381-45FD-8414-A4DF7D07636C.webp
D5D2CA46-2ECC-4BFF-A793-00B1521C67F5.webp

945977F8-2381-45FD-8414-A4DF7D07636C.webp
D5D2CA46-2ECC-4BFF-A793-00B1521C67F5.webp
A79C572B-735C-459E-B42E-D8EFFA886226.webp
 
Back
Top Bottom