Advice on Brush Guards

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
May 15, 2006
Threads
10
Messages
60
Location
Chicago and CA
Hello...

I opted against those cool headlights and decided that a brush guard or bull bar may be cooler as a first mod.

I found a great deal on ebay for only 200 bucks shipped for a brand new one (even had tail light protectors.. i think), but the company only offers it in the newer 98+ model :o .

Does anyone know of a good place to find a similar deal for the 80??
 
If you're looking for just the cool look of a brush guard, you're on the right track, but most of us here would suggest you keep looking. The brush guards you are looking at will actually do more damage in an accident or bumping up against a rock or tree on the trail than not having anything on there at all, hence the nickname "Damage Multiplier."

If you are looking for some function with the form and a little useable protection, look at some of the real bumper replacements (ARB, Slee, etc.). They give you the look you are probably going for and add some real protection to the truck. Search around. There are several posts from the last few months that chronicle the ARB bumpers standing up to deer, kangaroos, trees, and other cars.
 
that's right.. in even a slight fender bender you'll prolly damage your hood, headlights and grill. then you wished you spent the extra money on an arb bumper upgrade.

i will do a search and weigh out the pros and cons. this is my first time with the cruiser exclusively. i just moved to chicago from california, and essentially traded my dad his cruiser for my caddy cts (plus some $$ for financing med school)..

so with that, my budget is limited, but i want it to look tough but not actually do something that would inflict more damage in a minor collision.. is it the same thing withe bull bar?
 
so with that, my budget is limited, but i want it to look tough but not actually do something that would inflict more damage in a minor collision.. is it the same thing withe bull bar?

A tight budget may keep you out of the "Bull Bar" mod then. ARBs run $700-$900 (non-winch model or winch model) plus shipping if you can't find one locally. There are others that are a little less (search around - check out Slee and other MUD vendors).

As for inflicting more damage in a minor collision. From most reports I've seen and read about the other vehicle, object, animal, whatever is what takes the brunt of the impact, shielding your Cruiser more from damage rather than the other way around. Not the case with the look good but offer no protection brush guards out there.

Comes down to personal choice and what your plan is for the Cruiser. Some don't like the look of a big ARB bull bar on the front regardless of the pros.

If you do go with an ARB or similar and it is offered in both winch and non-winch models, IMO you'd be better off buying the winch model. Even if you don't have a winch and don't plan on ever having a winch, should you ever decide to sell the ARB or vehicle it should be easier to sell with a winch model.
 
I would put on nothing rather than have a brush guard, (search "damage multiplier"). If you do not have enough cash now, put away $50 or so bucks a month until you do and get something that is actually functional.
Cheers,
Sean
 
Theres great advise here. My friend bought a brush guard for his 96 and hit a deer on hwy 1 at around "55mph", Needless to say he and his wife were pissed, rattled and thankfully unhurt. The damage to me didn't look bad at the time, until the insurance totalled it. I bought an Arb straight away and he, Bought a ford F150???:doh: If you need to save the pennies first, then start saving. You really wont regret it. :beer:
 
(plus some $$ for financing med school)..

Man, I've been there and done that. Here's what you do. NOTHING.

don't spend money on your cruiser on 'cheap mods'. If you can't afford the good stuff, save up and wait. Or better yet, don't mod your cruiser at all. Drive it like it is and save your money.
 
Man, I've been there and done that. Here's what you do. NOTHING.

don't spend money on your cruiser on 'cheap mods'. If you can't afford the good stuff, save up and wait. Or better yet, don't mod your cruiser at all. Drive it like it is and save your money.

thanks a lot, doc! what speciality are you in? (if you don't mind me asking)

as for the cruiser.. doing things correctly seems to cost a lot of $$. it is definately awesome to see all these top notch rigs.. here mine with a free mod.. (first snow in chicago for me and the cruiser)

n1222742_32984894_7894.jpg


Here's the car I used to have before trading my pop's for the cruiser... Better to not have a monthly car payment. Plus when I am back in california I get to drive it again (for free) :D
n1222742_31938915_7150.jpg
 
Man, I've been there and done that. Here's what you do. NOTHING.

don't spend money on your cruiser on 'cheap mods'. If you can't afford the good stuff, save up and wait. Or better yet, don't mod your cruiser at all. Drive it like it is and save your money.

Agree! The first thing I did was to take my bull bar off and I gave it to a premed student. Looks so much better without it. Now I have a real bumper and love it. The folks on this forum have never been wrong and they have alway talked me into quality mods which are best in the long term. Enjoy and welcome:flipoff2:
 
I make/sell drugs. :)

I dont' want to come off as a total kill-joy, but the less debt you have coming out of med school the better off you'll be. When shopping for your first 'job' you can get most big hospitals to pay off your student loan as long as it's not huge.

So if you have to buy something, pay cash. Put the credit cards away or have the limits turned WAY down, to like $500.

When you graduate, go out and buy yourself a tricked out cruiser.

There is something to be said for the appearance of success breeding more success. All other things being equal- two candidates for a position will be judged on how well they present the appearance of success. A good suit, nice car, gold watch... etc.. All these things DO pay for themselves in a professional setting.

They, however, do not pay for themselves while in school.
 
All other things being equal- two candidates for a position will be judged on how well they present the appearance of success. A good suit, nice car, gold watch... etc.. All these things DO pay for themselves in a professional setting.

They, however, do not pay for themselves while in school.

Well put.. I worked in clinical research prior to med school (about a year) and basically did research for the chief of medicine. when he would see that i carried myself professionally (car, clothing) I was well reinbursed for the hard work I put in. In fact, I got paid more with my bachelor's than the foreign MD's were getting doing essentially the same research (those guys do research to get into residency).

I just have to put all that stuff on hold for a few years until I graduate. But not to worry, I try to be smart with my investments and the only debt I am picking up is a portion of my yearly tuition... which is still a staggering balance of $40K/year (can't wait until i get in state tuition!)

Hope the drug-sales are treating you well!
 
I would agree on the other posts.. Dont buy a brush guard. The protect you from just that "BRUSH". If you hit something it will wreck the guard and you fenders.

I had one custom built that is rock solid. I have pushed over small trees and side swiped dirt banks and the only thing damaged was the paint. I retouched and now good as new.

Get an ARB or a custom if you have to have one. If you keep your truck , you would probally want to add a winch and brush guards will not support that.

Get what you can afford. I too am back to school at 43 and want to do mods and am limited with funds. I have to justify the need first.

Boz
 
Back
Top Bottom