Adjusting passenger seat forward?

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Nov 22, 2008
Threads
234
Messages
5,884
Location
East California
Is it possible to adjust the passenger seat forward further? I have the seat out waiting on parts from Gamiviti to fix the forward/back motion. I would like to get the seat bottom to move further forward so I can put the back of the seat fully flat to line up with the second row seat bottom. There's a picture in "The Land Cruiser Legend" showing this with the leather seats I know it was intended to be possible. I see on the seat screws underneath they have block off washers welded to the screw but I'm hoping there's another way to accomplish this without grinding off that weld and moving the washer.
 
Are you were looking at a picture with POWER seats? The manual and cloth seats are very different in what they do and the cushions on them.
 
Power.
IMG_20170105_211641051.webp
 
There are some mods going on there. The second row seats don't recline that far either. (At least not in my 96) I have seen a couple threads to modify the recline in all rows, but I cannot search right now..

I stand corrected.

Good luck and post if you find it!!!!
 
Yeah that's the JDM hinges on the second row that allow that. I actually have a set I bought off of @mot way back when. Great mod. I'm guessing the JDM models got the stopper washer welded on the seat adjustment screws in a different spot to allow this arrangement.

Edit: check that, LHD, maybe German market in that pic?
 
Yeah that's the JDM hinges on the second row that allow that. I actually have a set I bought off of @mot way back when. Great mod. I'm guessing the JDM models got the stopper washer welded on the seat adjustment screws in a different spot to allow this arrangement.

Edit: check that, LHD, maybe German market in that pic?

Yes, I'm thinking German as well. LHD, dash mounted O-s*** handle, no wood grain crap. Appears to be 95+.
 
Back
Top Bottom