Adding second door lock switch

[DeeRex]

I have a 91 FJ80 and love the thing to death. My has made a request for it.
I'd like to add a second door lock switch on the passenger side. Whenever I hop of the car to run into a store quickly, she like to lock all the doors (understandably.)

Has anyone done this? I have tried searching the forum but am having trouble finding this scenario.
I'm thinking I could use a secondary switch (I can pull from another 91) and cut into the rest to install it, running the wires to.....somewhere.

I have an FSM and EWD, but I gotta say it's not the easiest reading.

Thanks for the tips.
-Derek

 

[punkrockpoppa]

You could always run your original lock switch to the center console and place it in one of the coin holder slots. Just a suggestion.

...via IH8MUD app

 

[DeeRex]

I like that idea, too, but it would leave a hole in the drive side armrest.

 

[mattafact]

I like that idea, too, but it would leave a hole in the drive side armrest.

Duct tape.

 

[ppc]

Give her a second keyfob for the alarm system. Much easier than rewiring.

 

[brices123]

Derek,

Did you figure anything out? I am looking to do the same thing on my 1991.

I already have the trim pad from a 1992, and was going to order a switch from Specter, and try to wing it from there.

I am curious if you have done anything.

 

[Retro LC]

Derek,

Did you figure anything out? I am looking to do the same thing on my 1991.

I already have the trim pad from a 1992, and was going to order a switch from Specter, and try to wing it from there.

I am curious if you have done anything.

I am in the same boat. Would make life easier to add an all doors lock / unlock switch on the passenger side. Any FJ80 3FEers who have done this or know if it can be done?