acting up trailer lights

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Aug 6, 2004
Threads
91
Messages
846
When the headlight are off the turn signal and brake lights on the trailer harness work fine. As soon as I turn on the headlights I loose the turn signals at the trailer harness. All the lights on the truck operate just fine.

Does anybody have any ideas?
 
Are you using a 4 pin connector and 'combiner'?
 
Is this a custom wire job?
Did it work with this set up before (truck side) ?
Can you try another trailer or vechicle for testing?

.
.
ken
 
When the headlight are off the turn signal and brake lights on the trailer harness work fine. As soon as I turn on the headlights I loose the turn signals at the trailer harness. All the lights on the truck operate just fine.

Does anybody have any ideas?

Weak ground will do this, as will corroded/worn wires at the truck plug. Use a 12v light and test each of the plug connections on the truck side. Try running a separate ground wire (12ga or larger) to the trailer from the truck direct.

Napa and RV stores sell test plugs for the 4 pin connector that are good for getting to the root of the problem quickly.

HTH

Scott Justusson
 
Back
Top Bottom