AC "insulation" brittle: replacement?

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Apr 28, 2007
Threads
53
Messages
268
Location
heart: Colorado, House: Dallas,TX
I noticed that the "insulation" that goes over the AC tube is brittle and flakeing. does anybody have any ideas how I could repack/ reinsulate it?
I was thinking of somthing like hockey tape, that you could tape around it.
your thoughts

Thanks
Otto
AC pipe (2)001.webp
 
Hocky tape will burn and or catch on fire. DON'T use it. Get some purpose made heat reflective sheathing or wrap from somewhere like summit or jegs. You also could see how much CDAN wants for it.
 
Hocky tape will burn and or catch on fire. DON'T use it. Get some purpose made heat reflective sheathing or wrap from somewhere like summit or jegs. You also could see how much CDAN wants for it.
Please let me clarify, NOT actual hockey tape but rather an insulator/ that is about 1" wide and can be easily installed/ wrapped around the lenght of the pipe. Does this make sense? Sorry to not clarify sooner.
 
Makes sense but I don't know if you'd want tapew stuck to the ac line... I rewrapped mine with a heat sheathing and just wrapped it around the outside of the factory shielding. I think this is what you are planning..
 
Makes sense but I don't know if you'd want tapew stuck to the ac line... I rewrapped mine with a heat sheathing and just wrapped it around the outside of the factory shielding. I think this is what you are planning..
I dont know what my options are, thats why I am posting, thanks though. Anybody else have a good idea?
 
Back
Top Bottom