ABS Removal Diagram?

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jan 29, 2008
Threads
10
Messages
81
Location
Chapin, SC
I recall someone posted a diagram of brake line arrangement after ABS removal and I can't find it.
Does anyone have the link? I can figure it out but would like to see that diagram again.

I have poor braking and suspect some blockage in the ABS module. I bought a used one to tear down to figure out where a failure could be. The PO said he had recently flushed the line before removing the unit, but there was a lot of old, dirty fluid the the ABS module reservoir. There is probably no good way to flush that out without disassembly.
 
I can snap a picture of the routing when I get home tonight if no one chimes in. Great modification for my rig; however, I have to say not to do it for legal reasons............Cover my butt statement. YMMV

Poor braking in my rig was because of multiple reasons. Bulging soft lines, inoperative ABS, thin rotors, stuck caliper causing brake fade, LSPV leaking and allowing air into the system. The great thing about this modification is that you have to buy NOTHING to complete the job.

The smart and helpful people will be along shortly.
 
 
 
Thanks. Comet. Those are probably the best posts. I can figure it out from the second, but somewhere there is a markup of the FSM diagram.
 
I did not have a tube bender when I deleted the ABS. Please disregard the crappy use of space. One day I will get back in there.

IMG_9468.webp


IMG_9469.webp


IMG_9470.webp
 
Back
Top Bottom