ABS question.

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Dec 23, 2006
Threads
69
Messages
240
Location
Boston
Website
www.burnmachinefilms.com
So I've read several threads on this but none address what my truck is doing. The other day I started the rig
and the ABS light cam on and now stays on every start. The break pedal also jumps when breaking lightly occasionally. The trucks stops fine but its a bit un-nerving to say the least as this a daily driver. Any thoughts? Pads, rotors calipers all good as is the fluid level. Wheel bearings???? Beer?
 
Read the code(s), will often point to the problem area. The sensors sometimes get metal filings stuck to them, removing and cleaning can help.
 
I was experiencing the same issues as you but my ABS light wouldn't come on. I was on the brink of doing the ABS/LSPV. But I pulled the fuse to the ABS and my issue went away. I have been meaning to pull the front ABS sensors and clean them like @Tools R Us is recommending, but haven't gotten around to it yet.

As @Tools R Us recommends pull the codes, and clean the front ABS sensors and see if that fixes your issues.
 
Yes I cleaned the sensors and wala! But the issue is back again so back to drawing board!

Pull the damn fuse and see if the problem is still there. If so it might be something else causing the issue.
 
Back
Top Bottom