ABS Light & Pin 7 Mod

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Mar 18, 2008
Threads
28
Messages
214
Location
Whidbey Island, Wa
Just did the CDL switch and Pin 7 Mod, everthing works as it should; however my ABS light is on steady. Don't know if this is normal. Been searching the threads but no luck on the answer. Those of you who have done it got any insight.

:cheers:
Dave
 
thanks, familiar with ABS on with CDL engaged, but it doesn't go off regardless of switch position. I will retry ignition off then on with switch disengaged.

Thanks,
Dave
 
Sometimes mine will stay on for a bit, specifically when it's cold out. if I drive to work with the CDL engaged on snowy days, disengaging the CDL will unlock as it should, but the ABS light will stay on. When I come back out to head home after work and start the truck, the ABS light is always off. I never could figure it out.

I don't think the ABS light has ever stayed on for an unusually long time when it's not cold and snowing. HTH.
 
JJ, thanks.

Since doing the mod, mine has been on the entire time. Still not sure why. Everything works as it should though.

Dave
 
Are you sure you disconnected the correct wires when doing the 7 Pin mod?

I would pull that apart and make sure you didn't accidentally unhook something and disable ABS.
 
positive, I got the right wire, since it works as it should, but maybe something else came loose. I will investigate that tomorrow.

Gotta give the shout out to Ebag, I am originally from Eugene area, although not a :smokin:. LOL. Military forces Florida on me.
 
As per Slee's site:

In the left kick panel you will find a Silver metal box. That is the ABS ECU.

DSC03308.JPG


Remove it, and behind you will find a black plastic relay about the size of a cigarette pack. It says "transmission control relay" on it. That's what you are after. The EWD calls it the "center diff lock relay", same thing.

How much you wanna bet you forgot to plug the ABS box back in, or knocked the plug loose? :lol:



Eugene's a nice area.....to drive through. 100 square miles surrounded by reality. (And it rains too much!)
 
EBag, not gonna take that bet, cause I'm sure I can't afford to lose:flipoff2:

I would have probably caught that earlier, if I wasn't pissing off the squaw (code for :princess:) by being on MUD like usual. I think we need to think about bringing on marriage counselor's with CDan prices.:D

Dave
 
Since doing the mod, mine has been on the entire time. Still not sure why. Everything works as it should though.

This is not normal behaviour. The ABS light will go out when the CDL is unlocked.

-B-
 
If I remember correctly the CDL has the function to disengage ABS, even if you disengage it. This is if you don't want ABS in some situations and don't want CDL engaged either. In order to get ABS no to work you must first engage CDL and drive with it faster than 40 km/h. Than you disengage it and ABS still won't work. To restore it, you must shut down the ignition and turn it back on and that's it. So if you drove with CDL on faster than 40km/h it is normal that ABS doesn't work after you disengage it. Just switch the ignition off and back on and it will work like it should. We use this function when travelling on gravel roads, so we can stop faster. Of yourse it takes some skill to stop it in straight line. Regards, M
 
If I remember correctly the CDL has the function to disengage ABS, even if you disengage it. This is if you don't want ABS in some situations and don't want CDL engaged either. In order to get ABS no to work you must first engage CDL and drive with it faster than 40 km/h. Than you disengage it and ABS still won't work. To restore it, you must shut down the ignition and turn it back on and that's it. So if you drove with CDL on faster than 40km/h it is normal that ABS doesn't work after you disengage it. Just switch the ignition off and back on and it will work like it should. We use this function when travelling on gravel roads, so we can stop faster. Of yourse it takes some skill to stop it in straight line. Regards, M

This is what I have experienced.
 
Back
Top Bottom