a442f tranny

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Anything is doable. The question is has someone done it yet?
The tranny housing would need to be changed from the A442 to A440 housing, the 442 Torque Convertor would need to mated up to a fabricated flexplate and mountable to the 3FE. You'd need the computer and the wiring for the VB.

All this is dependant on the clearences from the crack to flexplate to TC to oil pump. Since the TC's for the 440 and 442 are different the flexplate is also. IIRC, the bolt pattern/crackhole on the flexplate is different which warrants an investigate.
 
Back
Top Bottom