Hi guys, I'm thinking to buy one of these kits to reprogram the A343F in my kzj78. I would like to know your experiences about it and if it's possible to help me chose which is the best between these two options. I"m using 32" 11.5 15 tires and i'm a bit worried about their size because i'm thinking that maybe they are big for the a343f. Anyone with experience about it?
A343F Transgo reprogramming kit
- Thread starter Agis4x4
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
Interesting. 32s are really not that big, and I don't think you'll have much of a problem. But would be interesting to see what this kit does.
I have used that kit in mine. have a thread on this forum . Messy but can be done. Just need to be clean and take yah time. Did the truck setting.... Hot rod one is too harsh... Works fine. I also push 35 inch tyres... with 4.88 diffs... No issues.....
Nice crisp shifts.... No delay.... saves the clutch plates ....
I used the HD2 kit... you dont use all the parts... depends on what stage you take it to.
Also google the kit , you will get hits from the lads with Supra's ....
Nice crisp shifts.... No delay.... saves the clutch plates ....
I used the HD2 kit... you dont use all the parts... depends on what stage you take it to.
Also google the kit , you will get hits from the lads with Supra's ....
- Thread starter
- #4
Thanks for your reply, yes i was reading your thread (very good) but i would like to know your experiences about it after some time working. I'm worried about clutches or torque converter. I"m pushing 32" tires with ratio 4:30 diff and even i had 33" around 2 years. Can you advise me some forum of supras to get experiences? Thanks
I've never really thought about this until now, but do you think this kit would be beneficial for towing? Easier on the transmission? It's a fairly economical upgrade....
Following this, might do this when I do my tranny service.
Running 32's or 33 with this kit will be fine, well worth it as it stops / reduces slip during gear changes... its that slip which wears the clutch packs. the factory setup is designed for smooth feel so they make them slip.... Torque converter will be fine.... Use a good synthetic fluid helps.... And an external oil cooler....