A rookie needs help

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Aug 27, 2007
Threads
50
Messages
404
Location
Flagstaff Arizona
I’m a long time reader and decided to be more active with IH8MUD as I have found this site to be so helpful. So here it is:

  • Thanks Woody for all the work you do.:cheers: I decided to become a Silver Star Member. If you haven’t done so, do it. It felt good to contribute to a place I’ve already got much from.
  • Found a thread (post?) that talked about replacing the intake boot from the air cleaner to the intake manifold. The person posting said they were trying to replace the air cleaner and it broke in two. “That’s what I did!”:whoops: Then I learned about Cruiser Dan. Cruiser Dan is my new best friend! Sorry Woody, I need to buy parts soon so right now Dan is the man.
  • Two years ago I replaced the surround on the front door speakers of my 94 Land Crusher. It worked well and I even took pictures.:idea: (Need to find ‘em) It only cost about $25 and the speakers work great, even today. Looked to see if someone posted anything like this didn’t find anything. Problem is, I often don't find what I'm looking for.:bang: If it’s not there, I would be happy to post.
  • I’m gearing up to do a rebuild on the front axel. I have grease on the inside of my rims and from what I read, that means the seals are bad. It’s either the seal between the diff and knuckle causing ‘soupy’ Berfs or the seal on the Berfs flinging the grease on my wheels, or both. Problem is I found a link about rebuilding the front axel and my dumbass can’t find it again.
  • I’m also looking for a preventative maintenance list so I can catch things before they get bad. I stumbled on a few PDFs of maintenance manuals but didn’t know if IH8MUD has a revised schedule for off roaders.
So that’s it for my first official post. This place has been great. I even think I got the wife wanting to do a few mods to the Crusher, but all in good time. For now, I need to do the PM and make sure everything is running right and is dependable.


Oh ya, someone said to do this.:flipoff2: Thanks for all your help
 
lol..

:flipoff2:

and welcome to the world of tech. real tech where you get to contribute.

I dont have advice right now, mostly because I am over my tech quota daily limit and I need to go back to chat and stir the pot.

Good luck, and have fun.
 
Look in the FAQ section at the top of this forum. There's a ton of info regarding maintenance, repair and modifications.
 
Look in the FAQ section at the top of this forum. There's a ton of info regarding maintenance, repair and modifications.

x2 - you'll find the thread you're looking for on the front axle there along with a host of other great info. Our mods in the 80's section have done a great job on this FAQ section putting together a wealth of information from people on the board.

You've already found cruiserdan - that's a great first move!
 
Back
Top Bottom