A Quick Aircleaner Solution???

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jan 22, 2003
Threads
284
Messages
8,118
Location
Kansastitty
I have been running a stock 2F aircleaner, but have changed my carb linkage to cable. Although I have not tried to fit it yet, it looks like the aircleaner will put the cable in a bind. Has anyone sourced a generic aircleaner that will fit a '74 F carb with no center post? It would have to clamp on.
I made an adapter to fit the 2F aircleaner, but can't seem to find a 3" generic aircleaner.

Anyone got a suggestion?:doh:

Ed
 
check out the cobrahead elbow on www.intakehoses.com just picked one up for my aisan, requires a hoseclamp. somebody else here on the forum recommended it to me and has had good results, i believe it was CruisinGA

Drew, thanks for the link. Bailey has or had one of my adapters. Good sheit on the link, though. Gives me some ideas;)

Ed
 
I have the cobra head mounted to the carb that then goes to a 90, then a few inches of pipe to another 90 and into a custom air box (round catch basin with side discahrge from HD) with a K&N cone filter inside. The side discharge then attaches to my snorkle via a rubbers sleever. Cobra, 90's, pipe and sleeve all came from www.intakehoses.com

I might have some pics but its slick as snot.

Kevin
 
I have the cobra head mounted to the carb that then goes to a 90, then a few inches of pipe to another 90 and into a custom air box (round catch basin with side discahrge from HD) with a K&N cone filter inside. The side discharge then attaches to my snorkle via a rubbers sleever. Cobra, 90's, pipe and sleeve all came from www.intakehoses.com

I might have some pics but its slick as snot.

Kevin

Kevin, if you can post a pic that would be great.

Ed


And that is a cool site.:cool: Thanks to both you and Drew:beer:
 
Back
Top Bottom