A/C questions for a 92

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Dec 13, 2007
Threads
108
Messages
479
Location
Arizona
I have a major leak in my A/C. No idea where but I thinks its in the dash. Last year my A/C suddenly started blowing warm. Thinking it just need recharging I had a shop refill it with R12. An hour later it has all leaked out. With gas at over the 4 a gallon i wasnt using my 80 much at all so I just sat. I now drive the 80 as a DD. It will getting warm here soon in Pheonix. I called a shop that the guys that the local cruiser club recommended. Over the phone he said if its the condensor im looking at about a grand. It is the evaporator im looking at about 500. Or maybe I have it backwards.

My question is...Does anyone have any info on what typically fails on these rigs? It blew cold for the hour right after it was recharged. I think the system is working fine. I hope maybe it might just be a hose or something simple.

I took it back the the shop that did the recharge right after it all leaked out. They poked around the engine compartment and couldnt seem to find a leak. Just trying to get an idea if i should be prepared to drop a grand.
 
You have it backwards. You can find the leak anywhere but the evaporator with compressed air (or nitrogen if you're picky) and soapy water. If they didn't find the leak, I'd guess that it's the evaporator, otherwise, if they did in fact know wtf they were doing, they would have spotted oil and pinpointed the leak.
 
I dont think I did good job of making explaining the situation. When I had it recharged I didnt have the shop add dye, not knowing I had a leak. So when I took it back they looked around and listened but couldnt find a leak in the engine bay. Im also not taking it back to the same shop. If it is the evaportor, thats the biggy $$$$$$ right?
 
The evaporator would be the more expensive of the two. A good a/c shop would have been able to locate the leak even if there wasn't any dye put in the system. They should have made sure it didn't leak before you left. Anyway, you can find the leak with the aforementioned method if it is not the evaporator.

The first thing I look for is oil, on every component, compressor first. If there is a black oily residue, you have most likely found your leak.
 
X2 on evaporator.
 
Where is the compressor? And would the compressor or evaporator be bad if the blew cold for an hour. I guess my question is can the still work but have leaks?
 
LOL Sorry I meant to say... can the compressor have a leak large enough to drain out all the R12 in an hour and still work? The system worked fine for an hour.
 
Yes it can. The most common compressor leak would be the front seal. I have yet to see that happen with our compressors though, and I have seen many. Sometimes it will not leak if the magnetic clutch is disengaged, but will if it is. By this I mean that when the compressor is on and spinning, it will begin to leak. The manifold plate gasket on the compressor could also be leaking. This is where your high and low side service ports are. Low side is closest to the engine block, and you should always charge on the low side. The compressor is on the passengers side under the p/s pump.

The most common source for a leak on any a/c system is at the schraeder valves. I pulled the valves when I switched to 134 and I remember something was different about our low side valve, but it escapes me.

I'm not sure where you live, but I can't imagine that it's much warmer than Texas, and 134 blows popsicles for me. It would be a whole lot cheaper to trouble shoot with 134 than R12 if you don't go with compressed air or nitrogen to find the leak(s).

I can walk you through everything I know if you need. A/C systems are really pretty simple.

Edit: I see you live in Arizona. We don't see 110F very often, but over 100 is common day in day out in the summer. You may want to stick with R12.
 
I bought my truck at Larry Miller Tyota when I lived there. Shorly after, My ac stopped working. I brought it to the firestone up on Olive, the charged it, and the next day it wa all gone. They didn't replace the schreader valves when the first charged it. When I noticed it blowing warm, I popped the hood and heard a hissing from the valves, they tightened the caps down so hard that it was pushing the high pressure valve enough to open it. I brought it back to them & they took the valve out & told me it was bad & not their fault. I asked for the part & it took them 5 minutes to find it & when they gave it to me, it had a big scratch in the metal next to the O-ring & the Oring was tore. I made complaints up the Firestone ladder but nothing came of it. I had to pay to get it filled again.

A couple of years later (95-- before R12 was bad:rolleyes:) the high pressure hose leading to the firewall sprung a leak. I fixed it myself & converted over to 134. ran that for a while, then converted to Freeze 12 (changing the dryer both times). Been working great ever since.:cheers:
 
Sounds I need to find an Honest AC shop that wont screw me with a bunch of parts and work I don't need. Hopefully it something simple. Im in Phoneix and would like to stick to R12 if its not too bad
 
I forgot the mention that right afte the leak. When I turned on the AC or the fan. It would blow out a fine mist with s strong chemical odor. Does that lend any clues?
 
It's in the evaporator housing. Quite possibly an o-ring on the line going to the expansion valve. It almost has to be. I'd put money on an o-ring, and here is why. They have to vacuum the system down to -4 inches of mercury which can pull the o-ring back and make it seal, but when the pressure on the high side goes up, the o-ring reverts back to a leaking condition. The o-ring can hold under vacuum, but not 200psi (or less/more) of pressure when the a/c is on. High side o-ring at the expansion valve. The shop has done nothing wrong if this is it, it happens. The shop likely didn't see high side pressures spike like they would if you were in traffic. The reason? They work in the shade, and or put fans in front of the condenser which cools the freon down lowering the pressure on the high side.

If your evaporator had a hole, it would not vacuum down, and if they didn't do that, they need to be put out of business. A pin hole is highly unlikely. Why? You saw the mist and smelled the freon. If they didn't watch the vacuum before they charged, then shame on them, and if so they need to be put out of business. My$.02.
 
Last edited:
TX then is it possible it just needs a new O-ring? Im not going back with in ten miles of the first shop!
 
Not only possible, but highly probable. The odds are so good, I put money on it. I'd even put money on it being the high side at the expansion valve o-ring.

This is assuming that the shop did vacuum the system, and I would have to imagine that they did.
 
Last edited:
Thanks!
 
Back
Top Bottom