A/C PROBLEMS...any help?

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Nov 3, 2015
Threads
6
Messages
22
Location
jacksonville nc
Ok here's the deal I bought the 80 last fall and the a/c worked like a champ but it made alot of noise....almost as if the tensioner was shot didnt think much of it since it was getting cool outside but now that summer is here i would love a/c haha..I inpected the tensioner pull it checked out fine .belt is fine(although i did remove to stop the god awful noise)...but I did notice some play in the actual a/c compressor pulley and I'm quite positive that's where the noise is coming from...my question is..is there a bearing in the pulley of the compressor that can be replaced or are we looking at a hot miserable summer? I highly doubt I can afford a new compressor at this point in time? This is technically my wife's daily driver since it's the only automatic we own lol so she has been hounding me to get it fixed
 
Looks easy to me to pull and check but the manual shows the rotor and stator but no bearing but it has to have a bearing my guess inside the rotor.

001.webp
 
Thank you for the reply....it looks simple enough to take apart...I'm very mechanically inclined I have just never messed with a A/C system...I have yet to aquire a FSM or Chilton manual for this thing...which I should have don't that day one haha..hopefully I can figure this out w.o having to purchase a new compressor...when I was messed with it..it had play up and down..side to side and forward and back...
 
Well just tried to remove the top piece and your going to need a puller to suit as it's on a tapered shaft with a key or have someone hold the top section while you smack with a brass drift. Once that's removed it should be smooth sailing.
Good luck if you need any more info from my manuals send a PM.
 
Back
Top Bottom