a/c & heater system help

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
May 11, 2005
Threads
75
Messages
345
Location
OKLAHOMA cITY
Howdy all.

When I bought my 96' 80 5 years ago, the a/c heater control never would move the mixer in the engine bay from hot to cold. I would have to pop the hood and move the mixer lever by hand.
Also the vents inside the truck would not completely close, so warm air might come from the floor vents, but cold air comes from the dash vents, Which keeps it from getting really warm in the winter.

I have tried 2 different thermostat control units, and no change

After some sleuthing, I found that almost all of the vents levers behind the dash seem to work and move correctly, but there is a vent door behind the center vents that seems to not move at all.


anyway, anyone take their dash apart and repair the vent system themselves? and what kinda job is it? a three banana job, or is it full bushel of bananas to do? Or would it just be better for me to cover myself in bananas and jump into the monkey pit at the zoo?
 
This is what you need to do first:
upload_2017-11-21_15-47-22.webp


upload_2017-11-21_15-47-44.webp


upload_2017-11-21_15-48-2.webp
 
After you've verified that all the functions of the climate control module are working, you need to check the harness connector. After that, check the operation of the mix damper:
upload_2017-11-21_15-50-16.webp
 
Unless you're 100% certain the climate control unit is working, then you can move on to the air mix damper operation. It's a :banana: job. It just takes time.
 
Wow, you are awesome!
I will start on this next weekend!!

Thank you.
 
Back
Top Bottom