For Sale '97 80 Series - springs, shocks, front bumper, tail gate carpeting

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jul 28, 2010
Threads
15
Messages
178
Location
San Francisco Bay Area
Location
United States
Recently installed a OME lift and ARB bumper so I've got some take off's up for sale.

Specifically a matching set of F/R springs with about 115k on them. The truck probably sat about 1" lower than stock so that gives an idea of where they'd ride as replacements for you cruiser/4runner etc.

The shocks were replacement Monroe's. Not sure how many miles (bought the rig used), but from how clean they are, they couldn't have more than 10k miles on them... No way of knowing, but I can tell you they were performing well when I removed them - no bouncing, soaked up bumps, not harsh and never bottomed out.

The front bumper has seen better days. The "wings" have some gouges on them, but are intact. The main section look like it was in an accident at some point as the lower middle part of it is bent inward. I also, have the frame "horns" and those are in good shape - I guess the impact wasn't enough to bend those... All nuts, bolts, mounting hardware is available.

Lastly, I installed a WagonGear tail gate lid and have a dark brown tail gate lid carpet for sale, too. It has a few minor stains from what look like oil, but the spots are pretty small - less than a dime size and there's only a few of them. All plastic mounting studs on the back are intact and in good condition.

Pricing:

Springs - full set - $40
Springs - front pair - $25
Springs - rear pair - $25

Shocks - full set - $40
Shocks - front pair - $25
Shocks - rear pair - $25

Bumper - full bumper - $50
Bumper - main section - $20
Bumper - wings (2) - $40

Tail gate carpet - $20

Pick up in San Francisco preferred. Shipping at cost. Guesstimating the value of stuff from other listings on Mud - if I'm off, make me an offer. Cash is king, Paypal works, personal checks accepted, but will wait for payment to clear before shipping.

Thanks for looking!
 
Is wagongear easy to install?

Yup. Just make sure you have 3" blades if you're using a jigsaw. 1.5" blades aren't long enough to cut the support brackets and you'll end up breaking two before you figure out what the hell is wrong. Also, the nylock nuts aren't easy to get threaded so take your time, or you'll end up cross threading it and having to cut the bolt to start over. Thank goodness Kevin includes extra hardware...
 
bizzump
 
I'll take some pics hopefully tomorrow and post them up...

The Wagongear lids isn't for sale, but the carpet it replaced is!

I'll take pics of everything so it's clear...

Thanks!
 
Pics!

Hey All,

Sorry for the delay in pics... I think this will clear up some of the confusion on what exactly is for sale... To be clear, the ARB and Wagongear parts are not for sale - it's what they replaced that is for sale!

Anyway, here are the pics - let me know if you have any questions!


+++


First up Bumpers - as you can see they're not in perfect condition, but are in working order. The main section has taken a hit in the lower middle section, but the dent is uniform and to me wasn't that noticible when installed on the truck... The Bumper Wings are scratched. They are plastic so the have some grooves in them, but won't rust obviously... Honestly, this bumper isn't for a show truck by any means, but will suffice as protection.
IMG_0842.webp
IMG_0841.webp
IMG_0840.webp
 
Tailgate carpeting

The pics speak for themselves... It's in good shape with a few small stains I honestly haven't tried to remove - not sure if they'll come out completely, but I imagine with some elbow grease you could make them lighter. "Backing" and "clips" are in great shape and if you wanted to replace the carpeting, then it would be a good platform for that... Not worth it in my opinion, but there you have it...
IMG_0843.webp
IMG_0844.webp
 
Stock springs!

For all you 4Runner guys! You can clearly see the color codes, so let me know if you need to know anything else...
IMG_0845.webp
IMG_0847.webp
 
Stock shocks

They're pretty new stock replacement shocks. No leaks. All bushings there... Rode well... Tried to take a pic of the stamp... Let me know if you need to know anything else...
IMG_0848.webp
IMG_0849.webp
 
Bump.
I just bought the rears 2nd Gen 4runner fans! :steer:
 
Yeah you did! Enjoy!

Front springs, front bumper, shocks and tailgate carpeting still available...
 
What brand are the shocks? Yellow=Monroe? How many miles on them? Price shipped for all 4 to 57701? Thank you.
 
To the best of my knowledge the shocks are Monroe, but I"m not 100% certain. They don't say Monroe, in other words...

There's no way to know how many miles are on the shocks as they were there when I bought the truck used, but I had no complaints for the 6 months they were on my truck. They definitely do not leak and from their state of "cleanliness" and the look of the bushings, I'd say they're not that old. The bushings in other words are not dry or cracking and look fine...

Let me look into shipping and get back to you...
 
Back
Top Bottom