96 Front Brakes

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jan 2, 2007
Threads
21
Messages
42
Hi, I'm addicted to my Land Cruiser. I bought a white 96 with 175,000. I had the truck inspected at a Boulder CO. dealership to verify the condition prior to buying. The truck is in excellent condition except for a leaking drivers side steering knuckle and the brake pads are shot. I need to address these issues soon; however, I'm wondering if I should replace the wheel and trunion bearings while the front axle is disassembled? If I do decide to replace all of these parts I'm leaning towards using only Toyota oem parts, any thoughts on the reliability of non-oem components?
 
Welcome! :flipoff2: It is customary to show off your rig with pictures. ;)


If you are going to tear apart the knuckle to rebuild you should definitely do a Birf re-pack while you are in there. If you don't have documentation of replacement of the knuckle or wheel bearings I would assume they are original and replace them all. Good PM (Preventative Maintenance). Most aftermarket parts tend to be made in Taiwan and are crap, definitely use OEM. Look in the FAQ thread at the top of 80 series tech and contact user name cruiserdan for your parts. He offers an IH8MUD discount and free shipping on orders over $100 which you will hit. He is The Man for Toyota OEM parts and knows most part numbers off the top of his head (seriously), you can find him in the vendor area of this forum or click the American Toyota banner at the top and ask for Dan. Definitely read up on the FAQ before you order parts for brakes, birf pack, and fluid reccomendations. You will find more excellent knowledge than anywhere there. You can also use the search function and go advanced to isolate your search to specify the results. Good luck.
 
With 175K on the clock, I'd say you're surely going to want to replace those trunnion bearings. Depending on prior maintenance, you may be able to get by with the current wheel bearings, but unless you can leave the truck laying about for a few days should you find them in poor condition, you should plan to replace them too since you won't want to have to pull the axle apart again :rolleyes:

Order your parts from CruiserDan and you'll save a bundle.
 
Regardless, if your brake pads are shot, put some new ones on while you figure the rest out. It is an easy task to do and can cause serious damage if they go all the way down to the metal plates.

I do not endorse or recommend doing work on your own brakes unless you feel comfortable that you are confident in your own abilities to do it safely and properly.

YMMV
 
Not as good as OEM

I agree for most things, in this case the axle kit that Kurt @ Cruiser Outfitters sells is very nice and includes Koyo bearings ~$100.:D
 
Back
Top Bottom