95 Brake circuit help

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
May 19, 2014
Threads
4
Messages
8
This weekend my brother got gong ho about fixing his radio and removed a bunch of old stereo wiring form the PO. Well now the truck will not shift out of park and the rear brake lights aren't working. I have checked the STOP fuse and its fine I even tried moving fuses around and nothing. I checked the STOP fuse with a test light and it seems that it doesn't have power. im kinda lost as what try next. if I am understanding the EWD right the next place upstream of the fuse block is the tail lamp relay. all the other lights works and the truck starts and runs. any advise would be greatly appreciated.
 
... removed a bunch of old stereo wiring ...

Maybe removed one too many? Does the Defog fuse have power? They are powered from the white circuit, if the fault were much upstream, lots of critical things wouldn't work, like it wouldn't run. If you need to move it, can press the shift over ride, but not a good idea to drive without brake lights.
 
Maybe removed one too many? Does the Defog fuse have power? They are powered from the white circuit, if the fault were much upstream, lots of critical things wouldn't work, like it wouldn't run. If you need to move it, can press the shift over ride, but not a good idea to drive without brake lights.

Defog fuse does have power but not the STOP fuse. Luckily the truck is in the drive way so we haven't had to move it.
 
Defog fuse does have power but not the STOP fuse. Luckily the truck is in the drive way so we haven't had to move it.

Looking at the EWD, the Defog and Stop are powered by the same wire terminal, then connected together in the box. For the Defog to have power and Stop not, it likely is that connection?
 
Looking at the EWD, the Defog and Stop are powered by the same wire terminal, then connected together in the box. For the Defog to have power and Stop not, it likely is that connection?

I will look into that tonight and see what I can figure out.
 
Maybe some type of fuse tap had been used that spread out the contacts for the STOP fuse.

Something like this.

1899521
 
Guys I want to say thank you for helping me out with this. Turns out the bridge between the STOP fuse and DEFOG fuse was broken and causing the no power but there was also a wire that had been poorly spliced into by the PO for some reason that was broken causing our problems. We ran out of light last night so we didn't button it all up but will this weekend.
 
Back
Top Bottom