'94 stock bottle jack ?

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Dec 11, 2007
Threads
10
Messages
30
Location
Bonedale, Co
Got my first flat on my stock 80 this weekend. Pulled the bottle jack out, put it under the axle, and jacked 'er up. It wasnt even close to high enough when fully extended.:mad: Am I missing something here? Is there a special mounting point? Regardless I am going out and buying a Hi-jack, but what's the deal with the stocker?
 
I tested my bottle jack due to having a lift. It work just fine on pavement. Did you put it under the axle closest to the wheel as suggested?
 
Got my first flat on my stock 80 this weekend. Pulled the bottle jack out, put it under the axle, and jacked 'er up. It wasnt even close to high enough when fully extended.:mad: Am I missing something here? Is there a special mounting point? Regardless I am going out and buying a Hi-jack, but what's the deal with the stocker?

If it's sat for a while, it might not easily extend all the way. Mine's the same.

Take it and force it a little bit. There are more telescoping sections than you'd think. IIRC there are 4 including the innermost section. That means your jack should extend to 5 times its closed height - more than enough to lift a stock (or even 33") tire off the ground.

FWIW I keep a 4" x 4" x 4" piece of hardwood in all my trucks - you never know when you'll need to lift an axle (or something else) a lot!
 
Back
Top Bottom