94 Engine rebuild

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jan 29, 2003
Threads
248
Messages
2,716
I am looking to get an 80, I found one that has a engine knock. It already has a rebuilt head on it, what would it cost to rebuild the short block. It sounds like that is all it needs.

Who makes a complete rebuild kit of a 94?

I would install everything myself and do the rebuild myself. Everything should be good but the short block

Any help would be great

Thanks
Cacy
 
Contact LX_Treme here in the 80's section. He recently, IIRC, rebuilt a good portion of his short block when he did his head gasket job. Check out his thread--do a search under his user name.

I don't think there is necessarily a "kit" that you can buy that will incorporate all of the necessary parts and R/R items needed for a full short block rebuild. You'd have to, more than likely, piece everything together either going OEM or aftermarket as you desired.

Good luck.
-onur
ABQ
 
I just finished a rebuild on a 1FZ. Toyota doesn't sell a rebuild kit. I bought most of my parts from my local Toyota dealer, and a few from a local engine parts supplier.

Feel free to PM me with specific questions. For me, the rebuild was quite a learning experience!

For just the short block, I'm guessing that it would cost you $1400 - $1600 in parts and machining work.

-VT92
 
I just finished a rebuild on a 1FZ. Toyota doesn't sell a rebuild kit. I bought most of my parts from my local Toyota dealer, and a few from a local engine parts supplier.

Feel free to PM me with specific questions. For me, the rebuild was quite a learning experience!

For just the short block, I'm guessing that it would cost you $1400 - $1600 in parts and machining work.

-VT92

cool
post up some pics
how does she run now?
what all did you do? all oe parts?
 
What did I do?

Machine shop work
-Bored cylinders .030" over and decked block
-Cylinder head valve job
-Polished crank

Toyota parts
-Timing chain, sprockets, guides and tensioner
-Crank bearings
-Rod bearings
-oil pressure sender
-oil relief valves, springs for oil cooler and oil pump
-oil pump

Aftermarket parts
-Pistons
-Gasket set
-Heater/Rad./PHH hoses, belts
-Water pump
-Piston rings


It runs well, I'm still working out a few kinks: Oil cooler is leaking coolant, p/s leak.
EngineInst 052.webp
 
Back
Top Bottom