91/92' Board Brackets???

[1fastoy]

G'day, If any of y'all out there with the CSC or ? know of any1 with a set of OEM mounting brackets for a 91/92' FJ80 so I can install the factory running boards that I got from Ken in Az, (By the way bro, got 1 word for your new rear bumper build "SICK") Anywayz if someone out there knows of a set (6 brackets) total, I know most of y'all remove them for the rock climbing thing, I actually wanna install them for the weather we get up here, PLEASE lmk as my German Shepard is forced into using the tailgate ta get in & out for now, (she's not happy 'bout it) Tanx in advance y'all! Speed safely!!! P.S. A huge thanks to SaddleTramp for the CSC goodies!!!

 

[Saddletramp]

G'day, If any of y'all out there with the CSC or ? know of any1 with a set of OEM mounting brackets for a 91/92' FJ80 so I can install the factory running boards that I got from Ken in Az, (By the way bro, got 1 word for your new rear bumper build "SICK") Anywayz if someone out there knows of a set (6 brackets) total, I know most of y'all remove them for the rock climbing thing, I actually wanna install them for the weather we get up here, PLEASE lmk as my German Shepard is forced into using the tailgate ta get in & out for now, (she's not happy 'bout it) Tanx in advance y'all! Speed safely!!! P.S. A huge thanks to SaddleTramp for the CSC goodies!!!

View attachment 1933684

Are the 91/92 boards the same as the rest of the 80 series? I have several sets

 

[Otter]

Did the 91/92 come with running boards? The fender flares are smaller, so probably not the same as the later models.

 

[1fastoy]

Are the 91/92 boards the same as the rest of the 80 series? I have several sets

G'day, I'm not certain if the boards are the same, was truly hopin' one of y'all could fill in that blank...Lol. I do know out of the 6 brackets I've got (3 / side) the center bracket was at 90 degrees were as the other 2 were factory bent to 'round 75/80 degrees with the 2 mounting holes not lining up correctly either ( that part I can deal with) but under the rockers where the brackets would mount up it requires that the brackets attach at an angle not 90 degrees vertical.

 

[1fastoy]

I'm not sure if the 91/92' was available w/factory boards, however the front mudflaps that have to be replace to insert the boards behind the front wheels fit like a glove & mounted up too the flares as if they were meant ta be??? So I can only assume that the boards should work provided I'd have the correct angled body to board brackets???

 

[Otter]

Did the 93/94 have the smaller flares too? Maybe those will fit?

 

[1fastoy]

The factory mudflaps fit to the original flares like a glove, those aren't the issue at all, it's jus' the brackets that need to be the correct angle as far as I can tell?

 

[1fastoy]

Saddletramp, If by any stretch ya can part with a set of the mounting brackets & bolts (hardware) Please lmk, however they havta be the angled brackets as the 90 degree style will not work? No Hurry, No worries... Tanx 4 your time

 

[Saddletramp]

I will,look in my parts, but all of my running boards have been from93-97

 

[Saddletramp]

So one complete set of brackets is in the third picture and all 12 bolts to bolt the boards to the brackets are in the last picture. I suspect that the bolts going in to the captured nuts in the body are likely there, most people keep the bolts to keep mud out of the holes.

How do you propose getting these, if you want them?

 

[1fastoy]

G'Day SaddleTramp, 1st off sorry to not get back 2 ya any sooner, I can't begin ta thank you enough for digg'n that all up, Please lmk how much you'll be want'n for all that stuff & I suppose we'll havta figure outta day (probably a Sat)? the wife & I will roll down there to get with ya? Tanx again, Paul.

 

[Saddletramp]

G'Day SaddleTramp, 1st off sorry to not get back 2 ya any sooner, I can't begin ta thank you enough for digg'n that all up, Please lmk how much you'll be want'n for all that stuff & I suppose we'll havta figure outta day (probably a Sat)? the wife & I will roll down there to get with ya? Tanx again, Paul.

Free to you, I just hope they work.