8274 squeals itself to death

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Feb 9, 2002
Threads
247
Messages
1,207
Location
Utah
i assume its a lubrication problem.
it squeals very loudly, and seems to slow down like there
is some type of internal friction. if i'm winding up with no load
it isn't fast while squealing, and if i shoot some WD40 on it during the
process the squealing stops and the spooling speeds up.
i have to reapply the WD40 every 30 seconds to keep it quite
and operating with any speed.
is there somewhere i'm supposed to grease or pour in some lube?
 
Where are you spraying the lube..on the brake?


Remove the power cables from the battery, and then the winch.


Remove the two bolts that hold the motor on the housing, and then remove the three allen head fasteners that hold the top housing to the lower housing, and see what there is inside. Should only be 6 oz of 30w or 50w oil in there...


I would bet your issue is with your brake assembly....not uncommon for them to need attention after years of being in the elements...not that big of a deal....will need to remove the top housing to work on the brake.


1 800 543 WARN. They will send you a book and parts list for free. Come up with your serial number before you call them.


Good luck!


-Steve
 
Poser said:
Where are you spraying the lube..on the brake?

is this the brake?? cause this is where i'm spraying all over it.
whereWDgoes.JPG
 
I'll bet the brake pucks are worn or stuck. i've seen them get stuck in position and cause exactly what you describe. Also , remove plastic cover on other end of drum and put some axle grease in there.
 
thanks for the info everyone.
i'll bet there isn't any oil in that case....
thanks again.
 
Back
Top Bottom