80 Series Front Plate Bumper - NEW from Bump It Offroad

[Bump It Offroad]

We teased out the new 80 series front bumper at Rubicon last year:

And then at the Black Hills Cruiser Classic:

These are now available at our online store:

80 Series Front Plate Bumper

Specifications 3/16” steel shell 1/4” steel for the winch plate and mounting brackets 3/4” recovery points Positions winch slightly forward, to allow for installation of C&C Intercooler Will accommodate Warn 10K & 12K winches (requires re-location kit for solenoid) Light cutouts and mounts for...

shop.trimeki.com

 

[Bump It Offroad]

Specifications include:

• 3/16” steel shell
• 1/4” steel for the winch plate and mounting brackets
• 3/4” recovery points
• Positions winch slightly forward, to allow for installation of C&C Intercooler
• Will accommodate Warn 10K & 12K winches (requires re-location kit for solenoid)
• Light cutouts and mounts for Baja Designs Squadron and S2 pods
• Optional Light Mount or Full Buffalo Bouncer Tubing
• Optional Bolt On A/C Drier Skid Plate

 

[Bump It Offroad]

We have several options available for you!

You can get the basic bumper with no tubing options:

 

[Bump It Offroad]

You can go for the low hoop option:

 

[Bump It Offroad]

Our deluxe option is the Buffalo Bouncer (think North America version of the Roo Bar):

 

[Bump It Offroad]

We also designed an AC drier skid plate.

So you can go from this:

To this:

 

[ddjohan]

Do you have picture from the side profile of the Buffalo Bouncer?
It looks like the top part of the tube is leaning away from the hood. If that makes sense.

 

[Bump It Offroad]

Do you have picture from the side profile of the Buffalo Bouncer?
It looks like the top part of the tube is leaning away from the hood. If that makes sense.

I don't have a great shot right now, you can see a little bit of the side profile here:

Let me get a better image!

 

[Bump It Offroad]

Do you have picture from the side profile of the Buffalo Bouncer?
It looks like the top part of the tube is leaning away from the hood. If that makes sense.

This is not perfectly from the side, but a little bit better:

It does have a look of leaning away from the hood at the top, but I think that due in part to the run of the tubing, and how the uprights are angled on the back side by the grille. I hope that makes sense!

 

[ddjohan]

The video have good angle view of the side.
I really like the front bumper and the new rear bumper that coming up.
Need to save some now.

 

[Bump It Offroad]

Here is a nice piece showing our process for developing the new front bumper: