- Joined
- Dec 12, 2006
- Threads
- 2
- Messages
- 8
- Location
- United States
Working on a 71 FJ40.
A) Transmission/PTO/Tcase/Winch. NO cable. Drum had minor surface scratching. Frame wasnt bad at all. Media blasted and painted parts. Spooled smoothly, pulled fine on flat and 35 deg. incline. Previous owner put a grade 5 bolt in where roll pin was. Have a roll pin to replace and will install if buyer wants. Transmission and case drove prefectly before removal. All selected ranges were selected with no chatter. Palleted and ready to go. $1500/obo for all of it.
B)Axle set - Disc brake front with lockouts, rear drums. I would call these housings, diffs need to be rebuilt. Spun the yoke and they def. are missing teeth. Palleted and ready to go. $250/pr. $425 if you want the EZ locker with it.
C)Steering box $20
D)brake MC w/booster $25
E) NIB....well still in box frm tractech Ez locker. $210 shipped.
F) Dodge D44 front and Chry 8" rear from RamCharger, 3.73, needs brakes and dont know if 4wd vaccuum acutator works, bearings were shot on rear. $150/pr
G) 2002 Stock TJ coils. $40 pr
H) 700R4/208 - Both need rebuild $150.
I) NP203 from TH350, No adaptor. $200
J) NP205 from TH350, with adaptor. $400 SPF
Will send pics if you give me email address. Shipping from business 21223, palleted for free. Crate charge if going to Forwardair(BWI). Can meet up with 50 miles if your paying cash for the big stuff.
My PM box fills pretty fast so just click the drop me an email tab
A) Transmission/PTO/Tcase/Winch. NO cable. Drum had minor surface scratching. Frame wasnt bad at all. Media blasted and painted parts. Spooled smoothly, pulled fine on flat and 35 deg. incline. Previous owner put a grade 5 bolt in where roll pin was. Have a roll pin to replace and will install if buyer wants. Transmission and case drove prefectly before removal. All selected ranges were selected with no chatter. Palleted and ready to go. $1500/obo for all of it.
B)Axle set - Disc brake front with lockouts, rear drums. I would call these housings, diffs need to be rebuilt. Spun the yoke and they def. are missing teeth. Palleted and ready to go. $250/pr. $425 if you want the EZ locker with it.
C)Steering box $20
D)brake MC w/booster $25
E) NIB....well still in box frm tractech Ez locker. $210 shipped.
F) Dodge D44 front and Chry 8" rear from RamCharger, 3.73, needs brakes and dont know if 4wd vaccuum acutator works, bearings were shot on rear. $150/pr
G) 2002 Stock TJ coils. $40 pr
H) 700R4/208 - Both need rebuild $150.
I) NP203 from TH350, No adaptor. $200
J) NP205 from TH350, with adaptor. $400 SPF
Will send pics if you give me email address. Shipping from business 21223, palleted for free. Crate charge if going to Forwardair(BWI). Can meet up with 50 miles if your paying cash for the big stuff.
My PM box fills pretty fast so just click the drop me an email tab
Last edited:
