69 frame for 67 body

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jun 7, 2019
Threads
1
Messages
4
Location
Georgia
I am new to 40 platform and searched a bit but still in sure. Can I use a 69 frame fir my 67 body? Any fabricating involved? I just had my frame sand blasted wich ended up being almost twice as much as quoted and my frame is in really bad shape so I’m hunting down a frame. Thanks for feed back
 
Steering box mount is different. That changef 9/67 with the start of the 68 model. Holes for the tail lights on the back could be different ( no big deal). The bell crank for steering could as well. Wouldn't be to hard just using later parts. Both these changed during 69. Everything should match. Steering box is going to require changing the pedestal or changing steering box. 9/67-7/69 would allow you to use your current steering wheel. 7/69-9/72 steering spline count is different. 9/72+ different column and steering wheel.
 
Steering box mount is different. That changef 9/67 with the start of the 68 model. Holes for the tail lights on the back could be different ( no big deal). The bell crank for steering could as well. Wouldn't be to hard just using later parts. Both these changed during 69. Everything should match. Steering box is going to require changing the pedestal or changing steering box. 9/67-7/69 would allow you to use your current steering wheel. 7/69-9/72 steering spline count is different. 9/72+ different column and steering wheel.
 
Back
Top Bottom