66 Oil Soft Lines...?

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Sep 27, 2003
Threads
210
Messages
894
Location
Berthoud Colorado
Website
www.w2m.com
Engine Oil lines in a 1966 FJ40 are cracked and leaking....I see on SOR that you can order them....I like an immediate fix..can you match them up at a auto parts store.



thx,
Rick...
 
Last edited:
They might be able to fabricate something for you....but the are not going to have something 'off the shelf' that will work...


BSP thread also bud...not NPTF....



Good luck!


-Steve
 
Take them your local house of hose or Tractor/ Hydraulic repair shop and re-use your old fittings....I did Dusty
 
This what I did re-using the old obsolete fuel line fittings I had my old 1f oil lines done back in the 80s the same way .... Dusty
P1010004-1.jpg
 
ok,
took the old line into a local fitting supply store...in and out of there in 10 minutes....I was fired up....

Untill I tried putting in the new line.....wrong threads. what a waste of 2 hours I didn't have...
Ordered both lines from SOR for $20.00 plus shipping. End of story.

thx for the input.
 
This what I did re-using the old obsolete fuel line fittings I had my old 1f oil lines done back in the 80s the same way .... Dusty
P1010004-1.jpg

Very Nice Dusty :cheers:

Not in this application but I've taken my bsp thread ends and had the shop reuse them. It's no big deal any quality shop can do it.
 
Back
Top Bottom