60 ubolts on a 40

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

No, 40 and 60 fts are very different. You can use 60 rears on the 40 ft/rr but they will be very long and might not have enough thread. Just buy new correct ones. You should not reuse U bolts.
 
iI want to go from the stock sp on the bottom of the axle to the new perch. so thier would be a ubolt in the front and one in the rear, per side

the reason i ask is, really dont trust my welds. if i use the square u-bolts in the maner above. some force would go to the stock sp. the round u-bolts would just want to spin if soa sp welds ever broke


to much work?
 
Back
Top Bottom