60 series PTO main box rebuld. wtf over?

[olandevo]

Hey guys, got a PTO winch off a wrecked HJ61 and putting it on my HJ60. Had to rebuild the main box because the bearings were shot. After cleaning it out and re-assembling everything, there seems to be about 1/8" play between the main gear and thrust washer between the two new bearings. There a 2nd thrust washer I don't know about? Or is the PTO designed to have some play in it for enguaging pourposes? I'm at a loss. Can somone who's rebuilt one of these let me know what they've experienced or possably post up an exploded view diagram from the repair manual? Any help is greatly appreciated! Thanks guys.

 

[landyNZ]

This is probably the exploded view of the PTO box you have. I don't really understand what you are describing to be honest, I have rebuilt one of these but mine required very little work as it had been used very little.

 

[olandevo]

This actually helps out A LOT! Apparently I'm missing the '36723E' this would explain the 1/8" play I have between the two bearings. XS

 

[olandevo]

This actually helps out A LOT! Apparently I'm missing the '36723E' this would explain the 1/8" play I have between the two bearings. XS

apparently not. I misstook that piece, its in there. Main gear still has play. Oh well im gonna go with it as is and hope the winch dosent fail on me!