60 front springs
- Thread starter Gumby
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
There's somebody else who rolled another 60 in Champaign.
https://forum.ih8mud.com/showthread.php?t=173446&highlight=rolled+60
https://forum.ih8mud.com/showthread.php?t=173446&highlight=rolled+60
Hey Gumby, I have a set you can have. I lifted mine and kept all 4 originals in case someone has a use. I am located in NE Ind. If you are going to the Hoosier Hoedown I can bring them to you. Let me know if you still have a use.
- Thread starter
- #5
I will be at Hoosier. Thanks!
I've done a little research, and it looks like I was steered wrong on the length of the 60 springs. The fronts are no longer than the 55 springs I have now.
The rears, however would work. Perhaps I can make a good hybrid pack.
Let me know what you need for the set and I'll pick 'em up in a couple of weeks.
I've done a little research, and it looks like I was steered wrong on the length of the 60 springs. The fronts are no longer than the 55 springs I have now.
The rears, however would work. Perhaps I can make a good hybrid pack.
Let me know what you need for the set and I'll pick 'em up in a couple of weeks.
- Thread starter
- #7
I will bring several. 
If I make a hybrid pack I'll need the rear leafs with the eyes and wrap, then some of the leafs from the fronts to support the weight of the engine, so I'm thinking four would be the best.
If I make a hybrid pack I'll need the rear leafs with the eyes and wrap, then some of the leafs from the fronts to support the weight of the engine, so I'm thinking four would be the best.