55 blower motor problems

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jan 14, 2006
Threads
76
Messages
1,154
Location
Durango, Crawlorado
I posted in the piggy section but I think they have the same setup so here goes:

The p.o. had the blower motor hooked to a toggle switch. When it failed I assumed it was the motor. I found another through a fellow mudder (thanks Don). I also happened to have a spare switch (thanks Dan); so I thought I would give it a go for the factory set up. I hooked up the old four way plug, and the two way to the new motor and...................YIPPEE!!

Then I smelled "the smell"

Then it quit working..............

Now I need a quick how to for a toggle switch. Both of the terminals on the motor read +. What's the story?

Thanks again-Josh
 
Does it matter which one of the terminals on the motor I use? Do I need a ground? Thanks.
 
One is blue with a red stripe and the other is blue with a black stripe. I'm going to assume the red is hot. Thanks-JJ
 
Back
Top Bottom