4wd Not Engaging

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Apr 25, 2005
Threads
17
Messages
96
I Have A 1969 Fj40 And Switched Out The Vacuum Shifter On The Transfercase For A Direct Shifter. Now My Front End Does Not Have Any Power When 4wd Engaged. With Hubs Locked. Front Drive Shaft Spins, But No Power. Any Suggestions?
 
BLUE69 said:
I Have A 1969 Fj40 And Switched Out The Vacuum Shifter On The Transfercase For A Direct Shifter. Now My Front End Does Not Have Any Power When 4wd Engaged. With Hubs Locked. Front Drive Shaft Spins, But No Power. Any Suggestions?
rebuild hubs? what do you mean it spins? as you can turn it with your hand or it turns with the rear dshaft?
 
The Front Driveshaft Spins When 4wd Engaged With Hubs Locked , But No Power To The Front End. With 4wd Engaged And Hubs Unlocked, Driveshaft Still Spins. When 4wd Engaged, The Driveshaft Can Be Hand Turned About Half A Turn.
 
If you're moving slowly, say 5 mph, and you pull the 4wd knob out, do you hear
a a bit of a grind? That's the sound of the 4wd sleeve meshing up with the front
output shaft. Sounds like it's going into 4wd to me, but one of the hubs might
not be working. Best way to tell is to jack all 4 wheels up and then run it in
4wd.
 
Thanks, Will Try Out Your Suggestions And Get Back To You
 
Back
Top Bottom