4WD engaging or what?

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Apr 23, 2005
Threads
10
Messages
21
Location
marietta, GA
the other day i ended up taking a side road to a mud site on my way home from work, then what seemed to be dry ground was actually covered deep, Thick chunky mud and i sunk down into it :eek: . I was pretty stuck. But then in 4wd i would give it gas to try and get out and no tires would spin at all. At first i thought i might just be too deep and didnt have the power to rotate the tires in this chunky mud. Then i put it in 2wd and got the the back tires to spin. 4wd again....no rotation. And i never got the front tires to spin at all. Is my 4wd not engaging? The front tires werent even that deep so i cant figure out why they wouldnt spin?

thanks
 
You sure you didn't shift the T case to neutral?

4 wheel is a sleeve that locks in the front drive portion If it didn't engage you still have the rear wheels spinning. Only way to stop the rear is to shift into neutral!

Nocents
 
I would still move a bit but it was like i was gettin more power to the back tires in 2wd or enough power to spin them.
 
Yep i turned em. I still had power in 4wd just not at much with the back tires as in 2wd.
 
Back
Top Bottom