4runner factory rear e-locker

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Sep 12, 2018
Threads
30
Messages
155
Location
Calgary
Hi guys

My 80 doesn't have factory lockers and someone local is selling a 3rd gen 4runner rear e-locker ( 8") with 4:30 gears, will this fit an 80 ?
TIA
 
Short answer, no.

Longer answer--it COULD be made to fit in the front axle, but would require much more modification than a "normal" Elocker swap. You'd be better off to swap in a whole factory-locked FZJ80 axle.

Leave the 4Runner locker for lesser, non LC Toyota people. :)
 
Short answer, no.

Longer answer--it COULD be made to fit in the front axle, but would require much more modification than a "normal" Elocker swap. You'd be better off to swap in a whole factory-locked FZJ80 axle.

Leave the 4Runner locker for lesser, non LC Toyota people. :)


Thanks!!
 
Either way so you know for your own “why” of not a bolt-up fit:

80’s are FR/RR:
The front is a hi-pinion 8”
The rear is a 9.5” (not a 9”, a 9.5” - don’t let Ford guys buffalo you)

I had a G1 Bronco guy who **swore** it’s another Ford part Toyota tightened tolerances on like the I6 motor, but they don’t get it.

I just smiled and thanked him, so he probably thinks he schooled a “dumb LC guy” ;)

(There’s NEVER been a LC 9” 3rd member)
 
Back
Top Bottom