40 Issues

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jan 20, 2006
Threads
16
Messages
53
Location
VT
My 1976 Fj40 emissions removed, header installed, in 4th gear at 50mph sounds like its topping out with excessive rpm and you really have to step on it to get any more speed out of it, it almost seems like its geared improperly but everything in the drivetrain is original. Could it be the carb, distributor, and vaccum advance? Whats the deal?
 
The tires are similar to stock, not oversized. I beleive the drivetrain is original. Someone suggested it may be the timing?
 
Is this a new issue or did you just get it ? A stock 40 kinda sounds like it's going to blow up on the highway normally. Is your clutch slipping ? That will make the RPMs go up under a load.
 
with the revs 'topping out', i'd be likin to know how the timing could affect that... wouldnt the timing being that far out even run at all?

i'm of the view that its more the gearing.. maybe in diff region?

p.s... ya not in low range are ya? ;) :D
 
p.s... ya not in low range are ya? ;) :D[/QUOTE]




50 in low. That should blow it for sure:eek:

Chris
 
Hmmm... never thought about the clutch slipping, good thing to remember. Between 50 and 57 mph your 40 will sound like it's giving you everything you've got. This is why most stockers keep her going at around 50-53 mph and not much faster. The 85 mph ads are a crock, probably for non-USA vehicles. Good luck!
 
metalonmetal said:
do you know for a fact that the drivetrain's original? it sounds like it's geared improperly. what size tires do you have?


your tranny is supposed to be loud but thats it. engine should eb fairly quiet..

i just started my truck with a fresh carb on it today....WOW it sounds like it has fuel injection on it ..

took it for a test drive and could go at least 10mph faster because it is so smooth. im not joking when i say it road like a wrangler on the road. i still have a smile on my face!


get carb rebuilt ( even if u don't think it needs it)

replace vacuum lines

distributor ( timing)

check spark plugs
wires
exuast leaks are a BIG one

you will be surpised when these are up and running in primo shape. just happy to say don't be disapointed...these machines are very improvable:cheers:
 
Took it for a ride today got it up to 70 with no problem it cruises nice at around 60. I guess it was just me being paranoid.
 
Well, that gives me hope after my engine/tranny/transfercase/distributor rebuild and other part renewal... It'd be nice to cruise faster than 52 all day! Seriously though, 10 mph gain? Wow.
 
Back
Top Bottom