4-pin 8274?

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Oct 27, 2002
Threads
8
Messages
51
I searched and couldn't find any info on this.

I bought a used 8274. It has a 4 pin male connector on the front, not a 3-pin or 5-pin. It looks like this

Did the 8274 ever come like this or did a PO change stuff? If it's factory, has anyone seen a remote for this? If not, I assume I can call Warn to get the parts to convert it back to normal, yes?

TIA
 
Thats not a standard Warn plug ... but you could just buy any winch remote and put the plug on that fits the socket, should be available from a camping shop or even Walmart. You only need three pins, the 5 pin connectors incorporate a 'safety' link to stop people shorting out the pins on your socket whilst the vehicle is unattended
 
Warn does not supply parts for that older-style remote....you will need to upgrade to the new five-pin remote and solenoid connector....
 
If the solenoid box works, I would be tempted to just wire inside to the cab with one of those kits we've discussed before and forget the remote. A brand new solenoid pack with remote is pretty spendy.


BTW-I did the upgrade to the new box with the 5 pin remote. I still have the 3 pin remote somewhere if someone needs it. ie, your box is good, but the hand held part is dead.
 
FWIW, I just went though something similar from warn, Posers right.

I did need to get a 5 pin remote. Like 70 bucks or so.

But I did get a 3 pin solinoid socket, The extra two pins on the remote dont make a difference with the socket.

I did not have any remote, or any socket for that matter when I got my 8274. So I needed both parts and they hooked it up.
 
Go to an RV or trailer shop. They have the 3 pin and 5 pin male and female connectors. One pin is common (12 V) to both the remote switch settings. The other 2 are for in and out of the winch. Should be easy to wire it up - even if it is not the Watrn standard.
 
The one on my 8074 is similar to that but not exactly. I can take a pic if you need. It's 76-77 vintage..

Wes, I have the same winch... off a J%#p if my info is correct. Does yours have a clutch release thingy, to free spool, or are you like mine where you have to run the cable out under power?

Just wondering, hi-jack over.

Rezarf <><
 
8074 version did not have free-spool option.


You can change the top housing and purchase the little free-spool lever and attach your motor to the new housing to have this option if you want it.


I have converted a couple of these styles over in the past....no biggie.



:beer:
 
Yep. I have the same one Drew. 8074 is no free spool.

I looked into converting it like poser says above but I NEVER used the freespool on 8274 that was on my fj40 so not having that option doesn't bother on the 70.
 
Any Warn Dealer can supply you with a replacement plug for your solenoid pack and a remote. Don't cheapen it up with random parts from elseware. Keep it compatible with every other Warn on the trail just in case you ever need to borrow a remote or lend yours out...My .02
 
Back
Top Bottom