4.88s on 33s?

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Dec 6, 2007
Threads
110
Messages
1,322
Location
NOW in Texas
I may have a chance to go 4.88s at a decent price. I'm not a fast and furiouse type of guy and my '95 LC is my daily commute. It is also my wheelin vehicle so....what say you?? i'm at sea level by the way
 
I'm loving it and have no worries if I want to move to 35's eventually. Just took it down to Rubithon and spent about 300 miles on I-5 each way at 70-75 with no problems.
 
I'm loving it and have no worries if I want to move to 35's eventually. Just took it down to Rubithon and spent about 300 miles on I-5 each way at 70-75 with no problems.

nice!! that't what i was thinking. if i went up 35s at aleast the gearing is done.
 
if you are thinking of going with 35-36 inch tires eventually than go with the 4.88. I had 35 x12.50s and did not notice a big difference even with stock gears. when i went with the 36x15.50s i noticed a huge difffence ,could use a gear change.
 
4.88's are way too low for 33's. Your engine is not tuned for that ratio.
 
4.88's are way too low for 33's. Your engine is not tuned for that ratio.

As in 35's w/ 5.29's? I thought you were a proponent of that overall ratio :hhmm:
 
As in 35's w/ 5.29's? I thought you were a proponent of that overall ratio :hhmm:

No, having power to spare and getting 14 mpg in a mix of city/highway driving on big ass Interco tires at elevations ranging from 5K to 12K ft sucks, plus the lower gearing when crawling is awful, and you shouldn't do it. It's just plain overkill.

You should always keep a non-stock 4x4 as close to stock as possible :flipoff2:

4.88's suck. Do 5.29's. You'll get a set for free.
 
No, having power to spare and getting 14 mpg in a mix of city/highway driving on big ass Interco tires at elevations ranging from 5K to 12K ft sucks, plus the lower gearing when crawling is awful, and you shouldn't do it. It's just plain overkill.

You should always keep a non-stock 4x4 as close to stock as possible :flipoff2:

4.88's suck. Do 5.29's. You'll get a set for free.

5.29s on 33s? :eek: you're not seriouse right nay?
 
on my FJ62 (3FE engine) i had 4.88s on 33s and it was perfect. many many many trips to NH and ME and it just ate up hills compared to the stock gearing. if you dont go too fast on the highway you will love them. do NOT get 5.29s for 33s...
 
on my FJ62 (3FE engine) i had 4.88s on 33s and it was perfect. many many many trips to NH and ME and it just ate up hills compared to the stock gearing. if you dont go too fast on the highway you will love them. do NOT get 5.29s for 33s...

how was it wheelin?
 
I run 4.88s with 315s during the summer and studded 285s during the winter. The 315s are just short of 35" and the 285s are right on 33".

During the winter, the most highway action I see is between Aspen and Glenwood Springs which is mellow highway not exceeding a posted 65 MPH. The 4.88s with 285s during the winter, BARELY are able to run at 65 MPH (true GPS speed, I can't remember where the speedo is at, but I think it's around 80 MPH).

During the summer with my 315s, my speedo is off 10% (according to GPS). So if my speedo says 80, I'm doing 72. For the sake of engine temperature, RPMs, and gas mileage, I keep it around 70 (true speed) on the highway. Of course, with a SC and 4.88s, I pretty much maintain that speed straight up, straight down, or flat (whatever that is :rolleyes:).

Nay is a maniacal old man (I really don't even know how old he is;)), who enjoys driving really slow both on road and off. Having driven a minitruck with a crawler box for the last 12 years, I can relate. I have the slowest hot rod in Aspen.:hillbilly:

The best thing is between my 80s and my minitruck, I haven't got a speeding ticket in 12 years!:flipoff2:
 
I've been searching for the gear ratio calculator but most if not all is with 35s. Curiouse as to what my rpms would be like at 60-65-70 mph. anyone have a simple math formula?
 
I have been toying with the idea of going to 4.88 gears on my 285/75R16 MTR tires.

The drawback? I'm 8 hours from anywhere interesting. The posted speed on the interstate here is 75 and 80 is the norm.

So... how would 4.88s on 33" tires handle being run at 80MPH? What RPM would I be running? Is it OK for my 7200 lb (full camping load) truck to run at that for 12 hours at a shot?
 
Nay is a maniacal 38 year old man who runs real tires that don't work very well over 70 mph and enjoys pushing the limits on optional obstacles where gearing is at a premium. He really should have 37" tires, but then that's why he was smart and went ahead and did 5.29's knowing full well that they would not be too low onroad with 35's and would be suited for 37's when the time comes. I agree with Nay that 4.88's are for supercharged prima donnas who think that driving 90 mph in a 3 ton lifted solid axle 4x4 on 35"+ mud tires is the most useful and sensible design goal because it makes absolutely no sense to bias the design of an offroad rig to offroad use.

Fixed it for you :flipoff2:

Never chose gears for tires that are already too small. If you need gears, you need 35"+, if you need 35's you'd might as well do 5.29's, and then you can do 37's if you want to. Haven't you guys figured this out yet?
 
:lol::lol::lol:

You know I'm probably gonna pickup some of those Trxus next based on all the s*** you said about them alone! Besides, I have no affection for my Wrangler MT/Rs. They came on the truck, end of story. Also since the Trxus are a little taller, my SC'd prima donna ass will be able to drive just a little bit faster...:hillbilly:






























...:flipoff2::beer:
 
Back
Top Bottom