3fe head gasket replacement

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Sep 21, 2006
Threads
33
Messages
291
Location
Temecula
I have been posting on here for a few months with my cooling system issues on my 91 cruizer. I found out the head gasket is leaking in the #1 cylinder. I was debating on doing it myself or taking it somewhere, but I just went ahead and started to take it apart. I figure I will just take my time and see what happens. The FSM seems great so far, every step is clear and it has been going smooth so far. I got stuck today when the exhaust bolts are frozen but I sprayed them with PB blaster and hopefully tomorrow they will want to come off. I hope this turns into a success story. I am definatly going to use Toyota parts after investing this much time. I will post some updates as I make progress. With my 2 year old assistant this project is not going to break any time records.
 
Keep in mind that the 3FE was also used in FJ62's from 1988-1990. So there are a wealth of threads on this topic in the FJ60 section. If you are pulling off the head of a motor with 180K miles, then you might as well get the head rebuilt and the injectors cleaned and balanced. Again, lots of good info on this in the FJ60 section.
 
I am defiantly going to take the head to a machine shop to get checked and fixed as needed. The injectors....not sure.
 
I am defiantly going to take the head to a machine shop to get checked and fixed as needed. The injectors....not sure.

If you're gonna spend that kind of money, just go ahead and spend the extra $100 or so to have the injectors done. You won't be sorry.
Then, run a cleaner (SeaFoam, BG44K) every few tanks to keep em clean
 
Where do you take/ send the injectors? This project was going so well until I found out the head is cracked. From the intake valve seat to the edge of the combustion chamber. Maybe a result from the loss of water or ??? The head gasket was also obviously blown in between the 1&2 cylinder. What luck that the Landcruiser I chose out of the many I looked at would have so many problems. I hope I can find a 3fe head on here. I am still amazed how good Landcruisers drive with such bad parts. I'll post some pics after the depression wears off.
 
Mudder's have used both of these shops with good results:

WitchHunter Performance - Injector Cleaning & Flow Testing Services

RC Fuel Injection

I'm sure there are other good shops too.

Both very good options according to MUD and other forums.

91Cruizer,

I think the best way to look at your situation is that you will have, honestly, about the most reliable vehicle on the planet, period, once you're done. It should give you years and years of safe, confident performance from here on out. You'll be proud of the work you put into it every time you get behind the wheel.

Curtis
 
Back
Top Bottom