38.5x14.5x15's

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jul 9, 2004
Threads
386
Messages
3,997
Location
Montgomery Co. TEXAS
Website
missionsonwheels.org
So I'm working a deal to trade my 35" MTR's with some TSL SX 38.5x14.5x15's. Everyone agreed to I should do the trade (til Woody moved me :D ) Previous Post
Tech question is what issues am I going to have running taller, wider tires?

Rig info: MT tube fenders front, sawzalled rear quarters, SM420/3spd 4" SUA, SR
Front axle: '78 TLC, Newfields, ARB & stock inners and brakes.
(looking into Long's inners & outers, cryoed rotors and knuckles if Woody's work)
Rear Axle: '77 TLC, RDB conv., PowerTrax No Slip
(looking into cryoed axles and rotors)
Wheels: MT forged Classics 15x10's with 3.75" backspace.

Should I go with a 60 rear axle or spacers on the back? I've heard about an IFS widening kit for the front 40 axle, but have not much research on it yet or again go with spacers to keep the tires out of the tub and springs?

:flamingo:
 
strength: Longfield inners and outers
cryo the rear shafts...IMO, skip the rotors...testing pending on the knuckles (can't hurt)
FROR ARP knuckle and lockout studs
hydro assist should be on your list....trust me....

You WILL contact the inner fenders front and rear pretty hard, I'm running the equivalent of 2.5" backspacing and mine hits....rear fenders need to have the lip pounded over, since that is now your new bumpstop (it is on mine too) - may need to reverse rear springs to keep tire out of front edge of body...
 
Back
Top Bottom