350 starter problem

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Sep 14, 2003
Threads
36
Messages
327
Location
Yorktown, Va
Tired to start the 40 yesterday and starter would spin but would not engage the flywheel. Have a 72 350 downey bellhousing and stock 4-speed. Got underneath and when the starter gear is extended it is about an inch to an inch and a half too far from the flywheel. Do I have the wrong flywheel, or is there a variation in starters? I know that 80-85 350's there is between standard and metric starters, but not earlier. Flywheel came off of a previous 350 fj40 conversion. Thanks everybody.
 
jhaha said:
Tired to start the 40 yesterday and starter would spin but would not engage the flywheel. Have a 72 350 downey bellhousing and stock 4-speed. Got underneath and when the starter gear is extended it is about an inch to an inch and a half too far from the flywheel. Do I have the wrong flywheel, or is there a variation in starters? I know that 80-85 350's there is between standard and metric starters, but not earlier. Flywheel came off of a previous 350 fj40 conversion. Thanks everybody.

Are you saying it overshoots the flywheel or does not reach the flywheel? Can you post up a picture so folks can better help with diagnosis? Chevy starters are pretty simple and most problems are easily solved if we can get the right information... :)

Nick
 
There are two different chevy starters for 350s. One is for the 168 tooth flywheel and the other is for the 153 tooth. THe 168 tooth is more common. THe starters look identical except for the way they bolt onto the 350 boss. One has a straight across bolt pattern on the starter bell, and the other is diagnal.
 
ranger said:
There are two different chevy starters for 350s. One is for the 168 tooth flywheel and the other is for the 153 tooth. THe 168 tooth is more common. THe starters look identical except for the way they bolt onto the 350 boss. One has a straight across bolt pattern on the starter bell, and the other is diagnal.

Plus the starter that bolts to the iron bell housings used for the SM420/465's...but I'd guess he doesn't have that one. :D

Nick
 
FWIW I have a Downey bellhousing and had to repalce a starter (didn't see the mattress in the mud puddle and a spring grabbed it) and I ended up swapping all the new guts into my old nose cone because I couldn't get it to engage right. Swapping the guts only took a couple minutes, and it was faster than educating the operator (me).
 
Back
Top Bottom