- Location
- United States
need 3:70 axles front and back for a 40
front bench seat 40/60 or any type
soft top also would be nice
front bench seat 40/60 or any type
soft top also would be nice
Wanted 3:70 Axles & Front Bench Seat
- Thread starter amos715
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
- Thread starter
- #2
YES !!!!!!!!
PMd you
PMd you
- Thread starter
- #3
No Hurry If You're Coming Through Oklahoma, Kansas Is Not That Far Either!
Let Me Know How Close You Are Going To Be.
Let Me Know How Close You Are Going To Be.
Amos -
Have a pair of JDM (read: low mileage) 45 axles with 3.70 gears - rear is a full floater.
Front tie rod is bent. Rear axle disassembled for inspection & housing hot tanked for powdercoating.
3"+ brake shoes & finned drums. Front axle is locked (no Aisin hubs).
Bought as FJ60 stuff off Ebay but found out they're FJ45 (fit 40s too), so no go.
$850 FOB Castle Rock, Colorado
PM me with your email address if you want pix.
Have a pair of JDM (read: low mileage) 45 axles with 3.70 gears - rear is a full floater.
Front tie rod is bent. Rear axle disassembled for inspection & housing hot tanked for powdercoating.
3"+ brake shoes & finned drums. Front axle is locked (no Aisin hubs).
Bought as FJ60 stuff off Ebay but found out they're FJ45 (fit 40s too), so no go.
$850 FOB Castle Rock, Colorado
PM me with your email address if you want pix.
Last edited: