2F Swap

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Sep 23, 2004
Threads
14
Messages
83
Location
Savannah, GA Area
So I have a bum f engine and going to be getting a 2F to swap in. I have a 73 fj40 swapping in a 78 2F. I have a 3 speed tranny and 3 speed transfer. So is there anything I should look out for other than lengthening the alt wires and slave line. It seems pretty straightforward that I can play it by hear with any problems i run into.
Thanks for any advice.
R.C.
 
Double check the motor mounts. The holes in the brackets for the 2F are a different size. I drilled mine out and have not had any issues.
 
rcb said:
So is there anything I should look out for other than lengthening the alt wires and slave line.


Understand the Alt wires...


What is going on with your slave line that you need to make it longer?


I have an 82 2F in my 69-40, and I am using the original hydraulic clutch parts...



Good luck!


-Steve
 
If you were changing to a four speed flywheel housing, but there were ealry four speed set ups that had the slave on the left side and not the right...



Good luck!


-Steve
 
Back
Top Bottom