24v system or 12v system??

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Oct 27, 2017
Threads
6
Messages
28
Location
australia
I have recently got my 1979 BJ40 home and in the process of fixing a few issues, and then some more no doubt. I have come across a bit of a snag.
One of the PO's has had doors and windscreen surrounds replaced from a BJ42 donor car and maybe the motor too, with a freaking ford bench seat, so she is actually a bitsa fordy model.
The heater has been disconnected (for what reason I don't know), while pulling blower apart for inspection and cleaning, I found that the heater resistor may have been at fault and or the non functioning tap for the disconnection.
I googled my head off to get info on the resistor, to find that the 1 I have is for a 24v unit. I'm now confused as to whether the bitsa was originally a 24v system or 12v, as it is currently running as 12v system or IF the heater blower was another donor part. Is there a way to find out if it was originally 24v system or not??
 
Back
Top Bottom